Electrical Inspection in Vancouver, WA
- Written report of what we found
- Useful when buying or selling
- Book online in a minute
What Our Customers Say
Do You Know What Is Behind Your Vancouver Home's Walls?
A hands-on check of your Vancouver home — panel cover off, wiring type identified, findings explained in plain words.
An electrical inspection is a hands-on check of the whole system: the service and panel, the breakers, grounding and bonding, the type of wiring in the walls, and the outlets, switches and fixtures room by room. It is not the same as the city inspection of new work; ours is a private check of what is already there, and Clark Public Utilities is not involved — the meter stays put. People ask for one when buying or selling, when an insurer wants an electrician's report, when an older house has never been looked at, or after a remodel they did not watch. We start at the panel with the cover off, read breaker sizes against the wire they feed, then test each outlet for ground and polarity and look at the attic and crawlspace where cable can be seen. You get the findings in plain words and a written estimate for anything that should be fixed.
How It Works Here
Tell us why
Sale, insurer request, older house or remodel
Panel first
Cover off, breakers, grounding and brand checked
Room by room
Outlets, switches, fixtures and visible wiring tested
Attic and crawlspace
Wiring type and splices where they can be seen
Your findings
Plain words, written estimate for any repair
The city as a whole is a 1990s city, but 4.9% of its homes were built before 1940, and 71% of those sit in the five tracts within 2.5 km of downtown, where a third of the housing is that old. That is where knob-and-tube and fuse boxes turn up, and where an electrical inspection before a purchase earns its keep.
When a House Needs an Electrical Inspection
What Affects the Cost of an Electrical Inspection in Vancouver
The size of the house and what you need the findings for set how long the visit runs.
Rooms to test
Every outlet, switch and fixture is checked in turn, so more rooms mean a longer visit.
A house near downtown
Most of the city's pre-1940 homes sit in the tracts near downtown, where knob-and-tube and fuse boxes need closer checking.
Built 1965 to 1973
Houses from those years get extra boxes opened to see whether the branch circuits are aluminum.
Attic and crawlspace
Easy access lets us trace visible wiring quickly; blocked or cramped spaces slow the visit down.
What the report is for
A buyer, seller or insurer may need set items written up, such as the panel's make or any live knob-and-tube.
No utility, nothing filed
It is a private check of what is already there, so Clark Public Utilities is not involved.
Repairs afterwards
Any repair gets its own written estimate and is inspected by the city or Washington L&I, depending on the address.
Every job gets a written estimate before any work starts.
Why Homeowners Here Call PWR Pro Electric
We open the panel
Not a glance at the cover — the wiring itself
Written estimate before any work begins
You approve any repair before it starts
We pull the electrical permit for you
For any repair the inspection turns up
Questions Homeowners Ask
Is this the same as a city inspection?
My insurer wants an electrician's report on a 1930s house downtown. Can you do that?
Does the utility take part?
How long does an electrical inspection take?
Book an Electrical Inspection in Vancouver, WA
Written estimate before any work begins.